How to Unlock Bedroom Door with Hole

Posted on

How to Unlock Bedroom Door with Hole – The lock on the door of the bedroom is designed for privacy and security or have no intruders. That’s fate in case that you need to open a locked bedroom door because, in an emergency, a high-security lock can be difficult to cut. If you have small children in your home, it is not uncommon that children will lock in a room, so it may be useful to know how to avoid a crash. Here is a practical, step-by-step guide that will show you how to pick the lock on the door of the room quickly and easily.

How to Unlock Bedroom Door with Hole

 

Step 1 – determine the type of door lock

First, it is necessary to determine what type of lock is installed in the door of the bedroom. In general terms, there are two types of locks that are used for interior doors or room. The first type uses a button – the button to close the door from the inside. The second type of lock used a knob twist that worked or went to work. You will be able to distinguish between two types of locking the slot or hole, which is located in the outside thumb turn.

If the outside button has a small hole with 1/4 inch in diameter, the type of lock is the button. On the other hand, if you see a small slot about half an inch long and 1/8-inch wide, this type of lock used the spin button lock mechanism.

 

Step 2 – open type push-lock Button

To unlock this mechanism, you will need to take a wire clip and open it. Alternatively, a wire coat hanger may be used. Take the wire and insert into the hole located in the center of the doorknob. Then push the tip of the hanger or directly a clip in the hole and try to keep it as straight as possible. If you go straight, you should feel the lock on the other side of the door. Apply pressure until it appears the lock and that they are capable of turning the knob.

 

Step 3-open a spinlock button

For this type, insert a flathead screwdriver into the slot in the handle. Once again, you need to insert the screwdriver as straight as possible. Once it is full, turn the screwdriver clockwise slowly. You will need to activate the driver more than one-quarter of the way to open the door. If the screwdriver becomes more than that… and the door does not open, your driver probably does not fit in the internal slot designed to open the door, then you will need to try again or get a screwdriver to a different size

 

Tools:

  • Metal paperclip or wire clothes hanger
  • Flathead screwdriver with a thin shaft

Leave a Reply

Your email address will not be published. Required fields are marked *